Foldable Steel Stillage – Stackable Drop Side Post Pallet

Description:

Steel stillage whose two side frames fold flat onto the deck while the capped corner posts still stack two and three high.

Product Detail

Product Tags

The sides fold, the stacking still works

Getting an empty steel stillage back is the expensive half of the job. The two opposing side frames on this unit hinge off the corner posts and drop flat onto the deck, so a returned stack of empty units takes a fraction of the height it takes when they are standing up. The stacking feature survives the fold, which is the part most folding designs get wrong.

What the hardware actually does

  1. Both side frames swing down onto the deck. Nothing has to be unbolted to fold a unit.
  2. U-shaped spring latches drop over the corner posts to hold the frames upright. A pallet pushed sideways against the side cannot knock a latch open.
  3. Capped corner posts carry the unit above, so erected stillages stack two and three high on the floor or in a truck.
  4. The deck is a welded tube grid. Sheet, plate and boxed parts sit on it without a pallet underneath, and coolant, water and swarf fall straight through.
  5. Feet are welded plate rather than bolt-on pads, so a loaded unit does not rock when it is set down on patched concrete.

Where a foldable stillage pays off

Panel and sheet handling, machined parts in bins, engine and gearbox cores, and rental fleets that ship out full and come back empty. Because the deck is open on all four sides, a forklift can take the unit by the base or by the top rails depending on how the load is balanced.

Dimensions and capacity

Footprint and height anywhere between 500 mm and 6000 mm, working load 300-3000 kg. Deck pitch, side height and fold direction are made to the customer’s drawing. The pair in the photos is one order stacked two high.

Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180

Send your message to us:

INQUIRY NOW
INQUIRY NOW

Technical guides

Reference notes for buyers specifying steel storage equipment — sizes, load ratings, coating choice and container loading.