Solid Steel Box Bin Container with Drop Gate and Stacking Feet

Description:

Closed ribbed steel box with a full-width drop gate, stacking corner posts and collapsible walls for loose parts that must stay covered.

Product Detail

Product Tags

A closed steel box for loose parts, swarf and anything that should not be visible or should stay dry. The walls are sheet, ribbed and framed rather than mesh, with a drop gate on one long face so the box empties without being tipped. Corner posts let loaded boxes sit on one another, and the walls hinge down so empty boxes collapse into a fraction of their working height.

Panel construction

  • Framed sheet panels with pressed ribs, which stiffens the wall without extra gauge
  • Solid floor, sealed at the frame, so small parts and fluid stay inside
  • Corner posts carried above the top rail, forming feet that stack into the box above
  • Fork pockets on two sides of the base for truck handling
  • Light grey powder coat inside and out, or galvanised where the box lives outside

Gate and access

The drop gate is hinged on the long side and latched at both ends. It swings down to the horizontal, which turns the box into a shallow tray for picking and lets a scoop or a grab take the last of the load without an operator reaching over a full-height wall. Above the gate the panel is fixed, so the wall keeps its stiffness when the gate is open.

Empty and stacked

Two pins per corner release the walls, and the panels fold down inside the base frame. Collapsed boxes stack on each other on the same posts, so a returned box takes a fraction of the space of a loaded one — the reason these are ordered for returnable loops rather than one-way trips.

Size and capacity

Built to your drawing from 500 mm to 6000 mm in the longest direction, with wall height and gate width set by what has to be loaded. Working load is 300–3000 kg per box depending on panel gauge and base build; where boxes stack, tell us the column height and the base is sized for the bottom unit.

Specified for

Machining and pressing shops collecting swarf and offcuts at the machine, foundries and casting cleaners, parts that must travel covered, and any site where a mesh container would let small pieces through.

Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180

Send your message to us:

INQUIRY NOW
INQUIRY NOW

Technical guides

Reference notes for buyers specifying steel storage equipment — sizes, load ratings, coating choice and container loading.