Heavy Duty Galvanised Steel Pallet Cage with Solid Sheet Base

A galvanised steel pallet cage built on a solid sheet base rather than a mesh deck. The distinction matters: a sheet base carries small castings, swarf, sand and loose fixings without any of it falling through, and it lets the unit be loaded by tipping rather than by stacking. The photographed unit carries a plate reading 1000 kg safe working load and four-high stacking — the frame and post section are sized for that, not for a light duty container.

Construction

• Solid sheet steel base — a full plate floor, boxed into the frame. No mesh to catch or drop small parts, and no liner needed.
• Folding side panels — all four walls fold onto the base. The unit returns flat and stackable in its own right.
• Forklift feet — the base is built with entry pockets, so it is handled by forklift or pallet truck rather than by hand.
• Corner posts and stacking cups — four-point location for stacking, with the posts continuing past the top rail so a mis-set cage cannot slide off the stack.
• Hinged gate — one panel is hinged and latched so the cage can be emptied from the side.
• Hot-dip galvanised — the whole fabricated frame is galvanised after welding, so the coating reaches inside the tube ends and over the weld seams. Suited to yards, wash-down and coastal humidity.

Where it earns its cost

• Foundry and machine shop swarf, offcuts and castings
• Scrap and reject parts collected at the line and tipped at the baler
• Aggregate, sand and loose bulk material in a returnable unit
• Heavy component sub-assemblies that will not fit a standard pallet footprint
• Outdoor yard storage where a painted box rusts through at the seams

How we build it

We are a factory, not a trading company. Send a photo and our design team works up the drawing; send a drawing and we build exactly that. Tube cutting, plate cutting, robot welding and the powder coating line are in our own plant. Electroplating and hot-dip galvanising are the only processes we send out — the frame is welded and finished here, then galvanised by a specialist, which is what sets the lead time on this unit.

Size range 500–6000 mm  |  Load capacity 300–3000 kg  |  base thickness, panel height, foot pocket spacing and finish to your specification.

Talk to us about your specification

Tell us the material, how it is loaded (tipped, craned or forklifted) and how high you intend to stack. Base plate thickness is the variable that decides the working load, so that is the first number we will ask you about.

Email: ivy@fsyougu.com  |  WhatsApp: +86 133 6030 6180