Sheet steel low down, grille at eye level
A body panel leaves the paint line already finished, so the container that carries it has to be closed where a fork or a corner will hit it and open where an operator needs to check the load. This one is built to that split: solid sheet on the top band and on the lower panels, grille through the middle band, and a small hinged hatch at the bottom for the fittings that travel with the parts.
Points that matter on the floor
- Sheet panels are cut on an automatic shear and folded in-house, which is why a panel edge lines up with the frame instead of hanging past it.
- Robotic welding on the frame. Corner joints come out consistent enough that a second container from the same order stacks onto the first without shimming.
- A ladder-style pull bar on the end face, so one person can walk a loaded container out of a tight bay.
- Castors sit under the frame corners, which keeps the deck flat even when the load is heavy on one side.
- Powder coat goes on after a full pre-treatment pass and cures at 280 degrees C. A container is about two hours on the line.
Runs that suit this container
Body shops moving painted skins and doors between stations, tier-one suppliers feeding a line, and returnable loops where the same container comes back empty and is reloaded the same shift. Panels stand upright in the tall bay instead of lying flat on each other, which is the reason for the height.
Built to your drawing
Overall size anywhere from 500 mm to 6000 mm, working load 300-3000 kg. Bay split, the height of the sheet band, hatch position and colour are all set by the drawing or by a photo of what you are using today. The navy and grey units in the photos are two orders of the same container.
Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180
Send your message to us:

-
Automotive Body Panel Steel Stillage with Rubber Lined Rails
-
Auto Part Roll Container Multi Tier Steel Shelf Trolley
-
Automotive Parts Trolley with Comb Dividers
-
Automotive Parts Trolley with Mesh Shelf and Slat Bar Racks
-
Auto Parts Picking Trolley with Divided Shelves and Swivel Casters
-
Custom Heavy Duty Auto Parts Trolley
-
Custom Auto Part Roll Container for Car Assembly
-
Portable Auto Parts Cargo Roll Container
