The steel does the work, the timber touches the glass
On an A-frame glass rack the frame only has to stay rigid. What determines whether the sheet arrives unmarked is the material in contact with it. Here that is timber: slats run across both inclined faces at set intervals, and the sheet edge rests on wood rather than on steel or on rubber pads.
- Inclined A-frame in welded steel tube, powder coated on our automatic line
- Timber slats on both faces, removable and replaceable on site
- Timber bearers along the base, so the bottom edge sits clear of the floor
- Base rails left open for fork entry from either side
- Timber over the frame faces wherever the sheet loads, so the contact points are wood
Why timber and not rubber
Rubber pads leave black transfer marks on clear and low iron glass, and the marks show up after tempering. Timber spreads the load along the edge without marking, and a worn slat is a five minute swap rather than a re-pad of the whole frame. On stone and ceramic the same slats keep the polished face off grit that collects on the base.
Where these go
Glass processors moving cut sizes between the cutting bench and the tempering line. Façade and glazing contractors holding sealed units on site. Stone and slab handlers. Anyone moving flat panel where the face finish is the thing being sold.
Dimensions and capacity
Frame sizes anywhere within 500–6000 mm. Load 300–3000 kg. Give us the sheet thickness range and the largest sheet you handle, and we set the slat pitch and the lean angle from that — a rack built for 6 mm cannot be re-used safely for 25 mm laminated without changing the geometry.
Contact
Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180
Send your message to us:

-
Red Steel Stillage Post Pallet Stackable Warehouse Rack
-
Folding Steel Post Pallet Rack with Flat Deck and Mesh Ends
-
Heavy Duty Galvanised Detachable Post Pallet for Cold Store Stacking
-
Blue Powder-Coated Steel Post Pallet 1350 x 950 x 1200 mm
-
Custom Steel Mezzanine Storage Platform with Stair Access and Guardrails
-
Heavy Duty Galvanised Steel Pallet Cage with Solid Sheet Base
-
Galvanised Folding Wire Mesh Pallet Cage with Half-Drop Front Gate
-
Three Tier Mobile Mesh Side Shelving Cart
