Automotive Body Panel Steel Container with Dunnage Blocks

Description:

Sheet steel container for car body panels, with dunnage blocks that hold parts clear of the floor and a hinged front panel for unloading.

Product Detail

Product Tags

Built for car body panels and long pressings. The parts rest on dunnage blocks held above the floor, the four walls are sheet steel, and the front panel hinges down so a finished panel can be lifted out instead of dragged over the side.

What the photos show

  • Four sheet steel walls on a welded frame, open top for overhead loading
  • Two rows of cushion blocks on rails above the floor, set apart to carry panels and bumper sections clear of the base
  • Hinged front panel with a centre latch, dropping flat for unloading
  • Corner posts ending in stacking feet

Why the load sits high

Panels travel on edge with a gap underneath them. That keeps a finished face off the steel floor, clear of grit and swarf, and lets a hoist or a pair of hands take the part from above. Block spacing, block height and the number of rails are set per part, not fixed at one layout.

Applications

Press shops and body assembly moving doors, wings, bonnets and bumper bars between stations; parts depots that want returnable packaging in place of one-way crates; workshops storing painted panels between jobs.

Size and load

Built to drawing, 500 mm to 6000 mm, rated 300 kg to 3000 kg. Cutting, welding and powder coating all happen in our plant – pre-treatment, drying, a 280°C bake, then cooling, about two hours per piece. Only electroplating and hot dip galvanising are subcontracted.

Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180

Send your message to us:

INQUIRY NOW
INQUIRY NOW

Technical guides

Reference notes for buyers specifying steel storage equipment — sizes, load ratings, coating choice and container loading.