Steel Frame Auto Parts Trolley with Soft Cell Dividers and Cover

Description:

Steel frame trolley carrying a suspended fabric cell grid and clear PVC curtain, so painted and plated auto parts travel without touching each other.

Product Detail

Product Tags

Soft cells instead of steel shelves, for parts that mark

Sheet steel shelves are the wrong surface for painted, plated or polished components. This trolley carries a fabric cell grid suspended inside a steel frame: each pocket takes one part, the part never touches the part next to it, and the face finish survives the trip. A clear PVC curtain hangs over the open side so the contents stay visible and stay clean.

How it is built

  • Welded steel tube frame, powder coated, with the deck plate at the base
  • Fabric cell grid in rows and columns, hooked onto the frame rails and replaceable cell by cell
  • Cell size set from the part dimensions you send, not from a stock list
  • Clear PVC curtain on the loading face, hung from the top rail
  • Casters under the base so the loaded trolley goes to the line instead of the parts being carried

Where it earns its place

Trim and interior parts going into a vehicle assembly sequence. Bumper and body panels between paint and fit-up. Plated brackets and machined housings that cannot afford a scratch between operations. Anywhere the count per container matters as much as the protection does.

Sizing

Overall frame within 500–6000 mm; load 300–3000 kg. What we need from you is the part envelope, the count per trolley and whether the trolley is pushed by hand or towed — those three answers fix the cell grid, the deck and the caster rating.

Talk to us

Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180

Send your message to us:

INQUIRY NOW
INQUIRY NOW

Technical guides

Reference notes for buyers specifying steel storage equipment — sizes, load ratings, coating choice and container loading.