Green Folding Wire Mesh Container with Sheet Base and Drop Gate

Description:

Folding wire mesh container with a solid sheet steel floor, drop gate and stacking legs, built for bulk parts handling and flat return freight.

Product Detail

Product Tags

A folding wire mesh container that holds its shape when loaded and goes flat when empty. The floor is a solid sheet steel panel instead of mesh, so small parts, offcuts and fittings cannot drop through the wires or catch on them.

Construction

  • Welded steel frame with wire mesh side and end panels
  • Solid sheet steel floor, powder coated in the same green as the frame
  • Drop gate at the front end on a two-point latch, so the operator can reach the last layer without climbing in
  • Four sides fold down onto the floor for return freight, stacked flat between loads
  • Corner legs with stacking cups, so a loaded container sits on the one below rather than on the goods

Where it works

Fasteners, castings, machined parts and mixed hardware on a production line or in a warehouse rack. The sheet floor also suits loads that carry small loose components, or anything with a sharp edge that would snag a mesh base.

Sizes and load

Made to your drawing: footprint and height anywhere from 500 mm to 6000 mm, working load from 300 kg to 3000 kg. Tube and sheet are cut on automated lines and welded by robot, then the frame runs through our own powder coating line: pre-treatment for dust, oil and rust, drying, a 280°C bake and cooling, roughly two hours from one end of the line to the other. Electroplating and hot dip galvanising are the two processes we send out.

Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180

Send your message to us:

INQUIRY NOW
INQUIRY NOW

Technical guides

Reference notes for buyers specifying steel storage equipment — sizes, load ratings, coating choice and container loading.