Soft cells instead of steel shelves, for parts that mark
Sheet steel shelves are the wrong surface for painted, plated or polished components. This trolley carries a fabric cell grid suspended inside a steel frame: each pocket takes one part, the part never touches the part next to it, and the face finish survives the trip. A clear PVC curtain hangs over the open side so the contents stay visible and stay clean.
How it is built
- Welded steel tube frame, powder coated, with the deck plate at the base
- Fabric cell grid in rows and columns, hooked onto the frame rails and replaceable cell by cell
- Cell size set from the part dimensions you send, not from a stock list
- Clear PVC curtain on the loading face, hung from the top rail
- Casters under the base so the loaded trolley goes to the line instead of the parts being carried
Where it earns its place
Trim and interior parts going into a vehicle assembly sequence. Bumper and body panels between paint and fit-up. Plated brackets and machined housings that cannot afford a scratch between operations. Anywhere the count per container matters as much as the protection does.
Sizing
Overall frame within 500–6000 mm; load 300–3000 kg. What we need from you is the part envelope, the count per trolley and whether the trolley is pushed by hand or towed — those three answers fix the cell grid, the deck and the caster rating.
Talk to us
Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180
Send your message to us:

-
Auto Parts Container – Sheet and Grille Steel Cage on Castors
-
Automotive Body Panel Steel Stillage with Rubber Lined Rails
-
Auto Part Roll Container Multi Tier Steel Shelf Trolley
-
Automotive Parts Trolley with Comb Dividers
-
Automotive Parts Trolley with Mesh Shelf and Slat Bar Racks
-
Auto Parts Picking Trolley with Divided Shelves and Swivel Casters
-
Custom Heavy Duty Auto Parts Trolley
-
Custom Auto Part Roll Container for Car Assembly
