An open top sheet steel box for heavy and awkward loads that would damage a mesh cage: castings, scrap, stone remnants, welded sub-assemblies. Five loaded boxes stack on their corner posts.
Build
- Sheet steel walls welded to a frame of square tube
- Plain steel floor with fork entry underneath
- Four corner posts finishing in stacking feet that locate into the box below
- Blue powder coat over a pre-treated surface, inside and out
Stacking and handling
The posts carry the load, not the walls, so boxes stack high without pressing on what is inside. Fork entry sits under the floor, which lets the box be lifted straight off the top of a stack or out of a rack.
Typical use
- Foundries and machine shops collecting swarf, runners and offcuts
- Stone and glass fabricators handling heavy remnants
- Assembly plants moving welded parts between bays
- Yards replacing timber crates with something that comes back
Made to order
Footprint, wall height and post height to your drawing, 500 mm to 6000 mm, rated 300 kg to 3000 kg. Tube and sheet are cut on automated machines, welded by robot, then powder coated on our own line: pre-treatment, drying, a 280°C bake and cooling, about two hours per piece. Electroplating and hot dip galvanising are the two steps we send out.
Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180
Send your message to us:

-
Galvanised Corrugated Steel Storage Container with Lockable Door
-
Steel Box Bin – Drop Side Stackable Container with Castors
-
Solid Steel Box Bin Container with Drop Gate and Stacking Feet
-
Steel Box Bin Stackable Metal Storage Container Open Top
-
Foldable Steel Box Bin Powder Coated Collapsible Container
-
Lidded Steel Box Pallet Crate with Drop Side Panels
-
Blue Perforated Steel Parts Container with Half-Drop Side Gates
-
Collapsible Steel Storage Container Stackable
