Steel Box Bin – Drop Side Stackable Container with Castors

Description:

Sheet steel bin with four hinged drop sides, a pull handle and a base plug, made for tipping swarf, offcuts and small parts rather than scooping them.

Product Detail

Product Tags

Four sheet walls, all of them on hinges

This bin is for material that arrives loose and leaves loose: swarf, offcuts, fasteners, small castings. Each side panel hangs from the top rail on hinge brackets and drops flat when the latch at the bottom is released, so the contents are tipped rather than scooped. A U-shaped pull handle on one end means a loaded bin gets pulled, not lifted.

Detail by detail

  • Solid sheet panels with a hemmed top edge, so a shovel or a grab bucket does not catch on the rim.
  • Hinge at the top rail, latch at the bottom of each panel: snap them shut to carry, release them to drop the side.
  • Capped corner posts, so bins stack whether they are empty or full.
  • Castors under the base corners for short moves inside a cell or across a bay.
  • A bolt plug at the centre of the base for wash-down and for draining trapped coolant.
  • Panels run through the same pre-treatment and 280 degrees C powder cure as the frame, so there is no separate paint stage and no colour mismatch between panel and post.

Typical duty

Machine shop swarf and offcuts, fastener and fitting storage, returnable shipping between plants, and collection bins at production cells where the contents have to be emptied by tipping.

Sizes and load

From 500 mm to 6000 mm across the dimension you specify, working load 300-3000 kg. Panel thickness, wall height, and whether the bin runs on castors or fork pockets are all set per order, either from a drawing or from a photo of the bin it replaces.

Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180

Send your message to us:

INQUIRY NOW
INQUIRY NOW

Technical guides

Reference notes for buyers specifying steel storage equipment — sizes, load ratings, coating choice and container loading.