Gas Cylinder Storage Rack – Twin Deck Welded Steel Stand

Description:

Welded steel stand with a slatted base deck and four upright locating posts on the intermediate deck, laid out to the customer's cylinder pattern.

Product Detail

Product Tags

Two decks, four locating posts

A cylinder stand only works if the bottles stay where they were put. On this unit the intermediate deck carries four upright posts with flat oval pads, and the bottle stands on the slatted base between them. Set the stand down hard off a forklift, or push it across a wash bay floor, and the bottles cannot walk across the deck.

How the frame is put together

  • Tubes are cut on an automatic saw and the frame is closed with robot welding, so the two decks stay square to each other across a whole production run.
  • The base slats are bolted rather than welded. A slat that gets bent can be unbolted and replaced without cutting into the frame.
  • The rear face carries a sheet panel with a rectangular window cut through it, so the bottles are visible from the aisle while the back of the stand stays closed.
  • Fork entry sits under the base. The unit is handled like a pallet, not wheeled.
  • Green powder coat over a full pre-treatment pass and a 280 degrees C cure. A piece takes about two hours from the front of the line to the back.

Where these earn their keep

Gas suppliers running cylinder exchange rounds, LPG bottle handling in forklift fleets, and workshop bays that want bottles off the floor and out of the traffic path. The front is open, so an operator lifts a bottle out without unstacking anything above it.

Size and load

Built from 500 mm to 6000 mm in the dimension that matters to you, working load 300-3000 kg. Post spacing, deck height and the number of locating posts follow your cylinder pattern: send a photo or a drawing and the stand is laid out to it. Painted or hot-dip galvanised; galvanising goes through our plating and dipping partners.

Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180

Send your message to us:

INQUIRY NOW
INQUIRY NOW

Technical guides

Reference notes for buyers specifying steel storage equipment — sizes, load ratings, coating choice and container loading.