Red Steel Stillage Post Pallet Stackable Warehouse Rack

Description:

Red powder-coated post pallet with a grid deck, welded posts and box feet, for stacking sheet and long stock without racking.

Product Detail

Product Tags

Post and deck

  • Four corner posts welded to a grid deck, each finished with a rounded head that takes the foot of the unit stacked on it
  • Box-section feet under every post lift the deck clear of the floor so a pallet truck or forklift gets underneath
  • Open grid deck — water drains, swarf and dust fall through, and a strap passes at any point
  • Powder coated on our own line: pre-treatment, drying, 280 °C cure, cooling, about two hours end to end per piece
  • Zinc and hot-dip versions go out to a specialist plant; automatic cutting and robot welding stay in our workshop
  • Posts can be built as a demountable version where the return leg matters

Stacking without racking

Each post carries its load straight down into the post below, which is the whole point: a stack of loaded stillages is a storage system with no uprights, no beams and no aisle width to design around. Load them where the work is, stack them against a wall, pull one out with the forklift when the job comes up.

  • Sheet metal and blanks waiting on the press
  • Long profiles, extrusions and tube bundles
  • Foundry and machining shops holding work in progress
  • Rental yards issuing steel pallets on a returnable loop

Specification range

Deck size and post height are built to order between 500 mm and 6000 mm, with a rated load from 300 kg to 3000 kg. Send the load you intend to put on it and we will size the post section from that rather than from a catalogue page.

Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180

Send your message to us:

INQUIRY NOW
INQUIRY NOW