Blue Powder-Coated Steel Post Pallet 1350 x 950 x 1200 mm

A steel post pallet — four corner posts on a tube-grid base, powder coated, stacking by locating one unit’s posts into the cups of the one below. The photographed unit measures 1350 × 950 × 1200 mm, which is a footprint sized to sit alongside a standard pallet rather than replace it.

Construction

• Tube-grid base — an open welded grid rather than a deck or a mesh sheet. Light, and it drains, which is why this format survives outdoor yards and wet process areas.
• Four corner posts — the posts carry the stack, not the base. Each post locates into a cup at the corner of the unit below, so a stack stays square under load.
• Stacking cups — four-point location, welded at the corners. Stacking is positive; there is no relying on the load sitting flat.
• Powder coated — coated on our own line: dust, oil and rust removal, drying, a 280 °C cure, cooling. The 280 °C cure is what gives the film its adhesion on a welded frame; a low-bake coating on the same frame chips at the weld toes within a season.
• No tools to erect — the unit arrives as one welded frame. Nothing to assemble on site, which is the point of the format where units are turned around quickly.
• Forklift or pallet truck — the base is open underneath for handling.

Where it earns its cost

• Tyre and wheel set storage and transport
• Long or awkward parts that fall through a mesh deck but will not fit a box
• Coil, sheet and tube stock held off the floor
• Production line buffers where the load is transferred by forklift
• Anywhere the empty unit has to nest down and travel back cheaply

How we build it

We are a factory, not a trading company, and we build to your drawing rather than to stock. Send a photo and our design team will work up the drawing; send a drawing and we build exactly that. Tube cutting, plate cutting, robot welding and the powder coating line all run in our own plant. Electroplating and hot-dip galvanising are the only two processes we send out, so this unit — powder coated — is fully in-house from tube to finished frame.

Size range 500–6000 mm  |  Load capacity 300–3000 kg  |  post height, base grid spacing, stacking cups and colour to your specification. The 1350 × 950 × 1200 mm unit shown is one size in the range; the base footprint and post height are both made to order.

Talk to us about your specification

Tell us what goes on it, whether it is stacked when loaded or only when empty, and how many high. Post height and wall thickness are set by the stack height, not by the load alone.

Email: ivy@fsyougu.com  |  WhatsApp: +86 133 6030 6180