Blue Steel Stillage 1516 x 1156 x 1178 mm with Removable Side Gates

A steel stillage built on a solid sheet deck with lift-out gate frames at the ends and hinged side gates. It is the unit shown at 1516 x 1156 x 1178 mm, powder coated blue. The gate frames lift out of their sockets, so the stillage can be loaded from the side, stacked with the gates in place, or run with end frames only when the parts are long.

Construction

• Solid steel sheet deck on a welded base frame, no mesh to snag small components
• Lift-out end gate frames seated in corner sockets, retained by the stacking posts of the unit above
• Hinged side gates with pin latches
• Stacking legs welded to the base frame; the legs sit on the corner posts of the unit below
• Forklift access formed into the base frame
• Powder-coated finish, blue, applied on our own automatic coating line

Features

• Two-high and three-high stacking in the yard or on the shop floor, with or without racking
• Gates come out completely, which makes overhead crane or direct forklift loading possible
• Solid deck also works as a mobile work surface for assembly and repair bays
• Sheet deck is easier to keep clean than mesh when parts are oily or dusty
• Frames and gates are replaceable if a unit is damaged in service

Applications

• Automotive and engine component storage between press, weld and assembly
• Heavy fabricated parts that would fall through a mesh base
• Foundry and machining cells where swarf has to be cleared out of the container
• Yard storage of finished goods waiting for dispatch

Dimensions and load

The unit in the photos is 1516 x 1156 x 1178 mm. Other sizes are made to order within 500–6000 mm. Rated load 300–3000 kg. Deck thickness, gate arrangement, post height and finish are set from your drawing or sample.

How it is made

Cutting, robot welding and the automatic powder coating line are in our own plant. The coating line runs pre-treatment, drying, a 280°C cure and cooling; a part takes about two hours end to end. Electroplating and hot-dip galvanising are the two processes we subcontract.

Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180