Auto Part Roll Container Multi Tier Steel Shelf Trolley

Description:

Four-tier felt-lined steel rack on braked castors, made for body panels and trim that must arrive unmarked.

Product Detail

Product Tags

Tier layout

  • Four fixed tiers on a welded steel frame, every deck lined with needled felt so a painted or coated part does not chafe on the way across the plant
  • Blue steel divider panels stand on the upper tiers, keeping flat panels upright and separating one part number from the next
  • Red castors at the base, two of them braked, so a loaded rack tracks straight down an aisle and then holds still while it is unloaded
  • Corner feet accept the frame above, so loaded racks stack a second high when floor space runs out
  • Grab handle on the end frame and protective caps on the base corners
  • Robot welded, then powder coated on our own line: pre-treatment, drying, 280 °C cure, cooling, roughly two hours through the line for a single piece

Built around body shop parts

Bumper covers, door skins, lamp units, mirrors and trim do not survive being stacked in a box. They lie flat on felt, one batch per tier, with a divider holding the batch upright — so one rack carries several part numbers without them touching. That is also why the rack runs on castors: it is loaded where the parts are made and unloaded where they are fitted.

  • Automotive body and trim logistics, plant to line side
  • Parts distribution centres picking by part number
  • Paint and coating shops moving finished panels without marking them
  • Assembly plants sequencing parts to a station

Dimensions and capacity

Number of tiers, deck pitch, footprint and overall height are all made to order. Dimensions sit within 500 mm to 6000 mm and the rated load within 300 kg to 3000 kg. Tell us the parts and how many per trip and the tier spacing follows from that.

Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180

Send your message to us:

INQUIRY NOW
INQUIRY NOW