Galvanized Wire Mesh Container Stackable Steel Storage Cage

Description:

Welded galvanized wire mesh container with a drop-down front wall and corner stacking feet, built to order in any footprint.

Product Detail

Product Tags

Structural detail

  • Welded mesh on four walls and across the base, so a checker reads a full load of parts without opening anything
  • The front wall drops on a hinge and closes on a loop latch; the opening is the full width of that side, not a hatch
  • Cast stacking feet at each corner seat into the top frame of the unit underneath, so cages go up in a stack on their own
  • Sheet and tube are cut on automatic machines and the frames are robot welded, both inside our own workshop
  • Galvanized finish, applied by an outside galvanizing plant — we do not run a zinc bath ourselves

Where the open sides earn their keep

Parts that arrive loose, get counted, and move again. Mesh walls mean a stock check happens in place instead of in a stockroom, and neither dust nor condensation settles the way it does inside a closed bin. Empty units stack on one another, so the floor space a returned container holds is a fraction of what it took when loaded.

  • Moulding plants handling preforms, bottles and moulded components between machines and the buffer area
  • Assembly lines that feed a station in sequence and take the empty container back on the same trip
  • Third-party logistics sites doing cross-docking and cycle counting at the gate
  • Spare parts distribution, where the part number has to stay readable through the mesh

Size and load

Footprint and height are built to your drawing anywhere from 500 mm to 6000 mm. The working load is set between 300 kg and 3000 kg, depending on wire gauge, mesh pitch and how the base is reinforced. Send a sketch, a drawing, or a photo of the container you are replacing and we will work from it.

Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180

Send your message to us:

INQUIRY NOW
INQUIRY NOW