A collapsible wire mesh container for bulk parts, cartons and mixed loads, with a flat plate welded to the front gate for a customer nameplate. The four side panels are hinged at the corners: lift them and drop the pins to set the container up, release the pins to fold it flat. The units behind it in the photo are stacked folded, which is how they travel between trips.
Construction
- Welded wire mesh infill in a steel angle frame; the aperture keeps small components in and lets air and water through
- Hinged corner joints on all four panels, with drop pins to lock the container open
- Half-drop front gate carrying a welded flat plate for a nameplate or label
- Stacking feet at the base corners, locating into the frame of the container below
- Galvanised finish for damp and wash-down areas; powder coating where colour coding matters
- Base frame open front and back for forklift and pallet truck forks
Features
- Folds flat when empty, which cuts the return-trip volume on export lanes
- Stackable when loaded, so loads go vertical instead of spreading over floor area
- The nameplate plate is welded on rather than clipped, so it survives rental fleets and repeated handling
- Mesh sides give a clear view of the contents; a load can be counted without opening the gate
- Panels, pins and feet are replaceable, so local damage does not take the whole container out of service
Applications
- Warehouse and distribution centre picking and put-away
- Returnable packaging loops between a plant and its suppliers
- Logistics equipment rental fleets that fold containers down between hires
- Scrap, offcut and small-parts collection at the machine
Dimensions and load
Made to order within 500–6000 mm. Rated load 300–3000 kg. Panel height, gate position, mesh aperture, base type, finish and where the nameplate sits are set from your drawing or sample photo.
How it is made
Tube cutting, sheet cutting, robot welding and the automatic powder coating line are in our own plant. The coating line runs pre-treatment (dust, oil and rust removal), drying, a 280°C cure and cooling; a part takes about two hours end to end. Electroplating and hot-dip galvanising are the two processes we subcontract, so galvanised versions are quoted on that basis.
Email: ivy@fsyougu.com | WhatsApp: +86 133 6030 6180
Send your message to us:

-
Lidded Steel Box Pallet Crate with Drop Side Panels
-
Folding Steel Post Pallet Rack with Flat Deck and Mesh Ends
-
Collapsible Wire Mesh Cage with Wooden Pallet Base for Bulk Parts
-
Heavy Duty Galvanised Detachable Post Pallet for Cold Store Stacking
-
Blue Steel Stillage 1516 x 1156 x 1178 mm with Removable Side Gates
-
Folding Wire Mesh Container – Powder-Coated Yellow Stacking Cage
-
Blue Perforated Steel Parts Container with Half-Drop Side Gates
-
Blue Powder-Coated Steel Post Pallet 1350 x 950 x 1200 mm
