1. Avoid bumps
This is the first thing to notice after purchasing the metal fittings. 家具は、取り扱いの際に慎重に処理しなければなりません; 硬い物はほとんどと接触しない場所の鉄の仕事が置かれている場所があるべき; 場所が選択されると, それは頻繁に変更するべきではありません. ; 鉄の家具が置かれている床面にもレベルを維持すべきです, so that the furniture’s legs are stable and level. それが安定していない場合, 鉄の家具は、少し時間をかけて変形することになります, 家具の寿命に影響を与えます.
2. Clean dust removal
It is best to use cotton knitwear as a rag to wipe the surface of metal furniture. It is best to use a fine soft wool brush to remove dust in the depressions and reliefs on the furniture.
3. Stay away from acids and bases
Corrosive acids and alkalis are the “number one killer” of metal furniture. If metal furniture is accidentally stained with acid (such as sulfuric acid, vinegar) and alkali (such as methyl alkaloid, soap water, soda water), immediately flush the dirt with water, and then wipe iron locker with a dry cotton cloth.
4. Stay away from the sun
The location of the furniture is best to avoid direct sunlight outside the window. Metal furniture is exposed to sunlight for a long time, which will change the color of the paint; the paint layer will crack and peel, and the metal will undergo oxidative deterioration. If you can’t remove the furniture in strong sunlight, you can cover iron locker with curtains or blinds.
5.Isolate moisture
The indoor humidity should be maintained within normal values. Furniture should be kept away from the humidifier. Humidity will cause metal rust and chrome plating to peel off. When cleaning the furniture, do not wash it with boiling water. Wipe iron locker with a damp cloth, but do not was iron locker with running water.
6. Eliminate rust
If the furniture is rusty, do not sandpaper it for yourself. If the rust is smaller and shallower, you can use cotton yarn dipped in engine oil to coat the rust. After a while, wipe with a cloth to remove the rust. If the rust has been enlarged and heavy, the relevant technicians should be asked to repair it.
ポストの時間: 2019-12-17
