1. Avoid bumps
This is the first thing to notice after purchasing the metal fittings. Le mobilier doit être manipulé avec précaution lors de la manipulation; le lieu où le travail de fer est placé devrait être là où les objets durs sont rarement en contact avec; une fois que le lieu est sélectionné, il ne devrait pas changer fréquemment. ; Le sol sur lequel des meubles en fer est placé devrait également être aplanies, so that the furniture’s legs are stable and level. Si ce n'est pas stable, le mobilier en fer sera légèrement déformée au fil du temps, affectant la durée de vie des meubles.
2. Clean dust removal
It is best to use cotton knitwear as a rag to wipe the surface of metal furniture. It is best to use a fine soft wool brush to remove dust in the depressions and reliefs on the furniture.
3. Stay away from acids and bases
Corrosive acids and alkalis are the “number one killer” of metal furniture. If metal furniture is accidentally stained with acid (such as sulfuric acid, vinegar) and alkali (such as methyl alkaloid, soap water, soda water), immediately flush the dirt with water, and then wipe iron locker with a dry cotton cloth.
4. Stay away from the sun
The location of the furniture is best to avoid direct sunlight outside the window. Metal furniture is exposed to sunlight for a long time, which will change the color of the paint; the paint layer will crack and peel, and the metal will undergo oxidative deterioration. If you can’t remove the furniture in strong sunlight, you can cover iron locker with curtains or blinds.
5.Isolate moisture
The indoor humidity should be maintained within normal values. Furniture should be kept away from the humidifier. Humidity will cause metal rust and chrome plating to peel off. When cleaning the furniture, do not wash it with boiling water. Wipe iron locker with a damp cloth, but do not was iron locker with running water.
6. Eliminate rust
If the furniture is rusty, do not sandpaper it for yourself. If the rust is smaller and shallower, you can use cotton yarn dipped in engine oil to coat the rust. After a while, wipe with a cloth to remove the rust. If the rust has been enlarged and heavy, the relevant technicians should be asked to repair it.
heure du Message: 2019-12-17
